Adjustment Program Epson 1390 Resetter -
Complete Guide: Epson 1390 Adjustment Program (Waste Ink Pad Resetter)
If your Epson Stylus Photo 1390 has stopped printing and is flashing alternating lights (usually the ink and paper lights), you are likely facing the dreaded “Service Required” error. This happens when the printer’s internal waste ink pad counter reaches its maximum limit.
7. Warning: Legal & Safety Notes
- The Adjustment Program is not an official Epson product. Using it voids your warranty (though the 1390 is long out of production).
- Do not change any other settings in the program (e.g., head ID, EEPROM data) unless you are a trained technician. You can permanently damage the printer.
- Ink is toxic – when cleaning waste pads, wear gloves and dispose of ink-soaked materials properly.
Here is comprehensive content regarding the Epson 1390 Adjustment Program (Resetter). You can use this text for a blog post, a download page, or a support guide. Adjustment Program Epson 1390 Resetter
Flashing Lights: The Power light, Paper light, and Ink light flash alternately (one after the other). Complete Guide: Epson 1390 Adjustment Program (Waste Ink
“Parts end of service life. Please contact Epson Support.” The Adjustment Program is not an official Epson product
Epson Stylus Photo 1390 Adjustment Program is a specialized utility used primarily to reset the "Waste Ink Pad Counter" when a printer displays a "Service Required" error. This error occurs when the internal ink pads, which soak up excess ink during cleaning cycles, are digitally flagged as "full" based on a preset page count. Core Functionality Waste Ink Reset:
Run the Utility: Extract the downloaded file and run AdjProg.exe as an administrator.