Bonavita Hudson Ii Lifestyle Crib Instructions -

The Bonavita Hudson II is a convertible lifestyle crib that transforms from an infant bed into a toddler bed, daybed, and full-size bed. Proper assembly requires securing the main frame panels, installing the mattress spring at appropriate heights for the child's development, and attaching the front rail with provided hardware while ensuring all bolts are tightened. To ensure safety, assembly should be completed on a soft surface to avoid damaging the finish, and all hardware must be periodically checked for tightness to meet CPSC standards. Detailed assembly instructions and conversion steps are required to ensure the longevity and safety of the product.

1. Mattress Fit: Use a full-size crib mattress (52" x 27.5"). The gap between the mattress and the crib sides must be less than the width of two fingers (max 1"). If it is larger, replace the mattress.
2. Hardware Re-tightening: Every 2-3 months, check all bolts. Wood compresses over time, leading to loosening.
3. No Drop-Side: This is a fixed-side crib. Never attempt to modify it to lower a side.
4. Stop using the crib: If the child reaches 35 inches in height or the top rail is below their chest.

Step 1: Inventory Check Open the box and lay out all parts against the manual. Pay special attention to the Mattress Support Board. It is heavy and has specific high/low orientations. bonavita hudson ii lifestyle crib instructions

• 1 Left Side Panel
• 1 Right Side Panel
• 1 Headboard (Taller piece)
• 1 Footboard (Shorter piece)
• 1 Mattress Support Base (Metal frame or wood slats)
• 1 Hardware Kit (Usually labeled "Bag A," "Bag B," etc.) containing bolts, barrel nuts, washers, dowels, and the Allen wrench.

Replacement Hardware:

The Bonavita Hudson II Lifestyle Crib is a beautiful and safe haven for your child to sleep, play, and grow. By following these instructions and guidelines, you'll be able to assemble and use the crib correctly, providing a secure environment for your little one. Remember to regularly inspect and maintain the crib, and don't hesitate to contact Bonavita's customer support if you have any questions or concerns. The Bonavita Hudson II is a convertible lifestyle

Care & maintenance

• Periodically inspect all hardware and wood for wear or damage. Replace damaged parts immediately.
• Tighten bolts/screws every few months or after moving the crib.
• Clean wood surfaces with mild soap and water; avoid harsh chemicals. Dry thoroughly.