Charger Manual: Bradex Bx60 Battery

Bradex BX60 Battery Charger Manual: The Complete Guide to Setup, Operation, and Troubleshooting

Introduction: Understanding Your Bradex BX60

Using the Bradex BX60 Battery Charger

Protection Features: Double insulated (no earthing required), thermal overload protection, and short circuit/reverse polarity safety. Operating Instructions To safely use the Bradex BX60 , follow these standard manual charging steps:

• Car Mode – For standard flooded/wet batteries.
• AGM Mode – Optimized for Absorbent Glass Mat batteries (higher absorption voltage).

Unplug the power cord first. Then, remove the black (negative) clamp, followed by the red (positive) clamp. 4. Understanding the Ammeter Readings

• Reverse connection alarm (charger errors out, no spark)
• Short circuit protection
• Over-temperature cut-off
• Over-current and over-voltage shutoff
• Fire-retardant casing (UL94V-0 rated)

A. The Ammeter (Display)

The large front dial is an Ammeter, not a Voltmeter.