Caraflo V200 Shower Instructions – Fast

The Caraflo V200 is a thermostatic mixer valve commonly found in static caravans and holiday homes. It is designed with 45mm fixing centers and is a direct replacement for the older V100 model. Installation Instructions

In hard water areas, the small nozzles on the V200 can become blocked with limescale. caraflo v200 shower instructions

Quarterly Deep Clean (Removing the Flow Regulator)

If pressure drops below a trickle, the internal regulator is clogged. The Caraflo V200 is a thermostatic mixer valve

4. Daily Usage Instructions

Turning on & setting temperature:

1. Turn the flow control counterclockwise (pull if needed) to start water.
2. Adjust temperature control until water feels comfortable (clockwise = hotter).
3. If water is too cool at 38°C, press the safety button and rotate further (max 48°C).

1. Turn off the main water supply.
2. Open the shower valve to drain all residual water from the pipes.
3. Remove the internal cartridge or blow compressed air through the lines to ensure no water remains, as freezing water can crack the brass body.

: Many Caraflo kits come with a water-saving trigger head. Press the trigger to release water; some models allow you to flick a small switch to keep the flow constant without holding the trigger. Shutting Off Turn the flow control counterclockwise (pull if needed)

Note: This should be done only if boiler hot water output is above 55°C.