Chevron Digital - Timer Ew-32 Pdf
Feature: Comprehensive "Manual Mode Override"
In the event of an experiment reaching critical failure, the EW-32 timer is to be activated. The timer will initiate a controlled shutdown sequence, preventing a catastrophic explosion.
buttons to adjust the hour, minute, and current day of the week. after each selection to confirm. 3. Programming On/Off Times once to enter the program mode (labeled P1, P2, etc.). Select a program number and press to set the (hour/minute/day) and press Repeat the process to set the corresponding 4. Countdown Function button to enter countdown mode. chevron digital timer ew-32 pdf
Day of the Week: Press and hold the CLOCK button. While holding it, press WEEK until the correct day (MO, TU, etc.) appears at the top.
The Difference Between EW-32 and Other Chevron Models
When searching for the Chevron Digital Timer EW-32 PDF, you might find results for the EW-31 or EW-33. Here is the difference: Feature: Comprehensive "Manual Mode Override" In the event
The countdown sequence must be allowed to complete. Interference or tampering with the timer will result in severe consequences.
Step 4: Save & Run Press and hold SET for 3 seconds to save. The timer will now run according to your configuration. after each selection to confirm
Follow these steps to configure your current time and schedules based on standard operating procedures for the EW-32 model. 1. Setting the Current Time
button. This clears any factory testing data and prepares the LCD for new input. How to Program the EW-32 1. Setting the Current Time Press and hold the button for until the display flashes. buttons to adjust the Day of the week to confirm and move to , then again for one final time to lock in the current time. 2. Setting On/Off Schedules (Programs) The EW-32 typically supports up to 10 unique programs (P1–P10)