Cscape 990 May 2026

Cscape 9.90 (specifically Service Pack 4 and later) is the cornerstone development software for Horner Automation Group's All-in-One controllers. It integrates PLC logic, HMI screen design, networking, and I/O configuration into a single environment, effectively eliminating the need for separate software packages. Core Functionalities

Security: Added AES Encryption for the download of security tables. Notable Improvements from Previous SPs

for configuring and programming their All-in-One Controllers (OCS). It integrates logic control, operator interface design, I/O configuration, and networking into a single environment. Overview of Cscape 9.90 cscape 990

To give you the most useful, accurate information for 2026, could you please clarify:

Key Features of CScape 990

4. Remote Monitoring & Data Logging

Using Cscape, you can program the CS990 to log data to an internal microSD card or send it to a cloud server via email (SMTP) or FTP. You can also set up the web server built into the CS990, allowing a technician to view live screen statuses from a standard browser.

Comment Your Code: Right-click a rung > Add Comment. Future technicians (including yourself) will thank you.
Use %M (Markers) for Internal Logic: Save %R registers for math and data. Use %M bits (Internal coils) for logic interlocking.
Watchdog Timer: In Controller > Configuration, enable the Watchdog. Set it to 500ms. If the 990 freezes, the watchdog will reboot it automatically.
Backup Projects: Cscape does not auto-save. Use File > Archive to zip the entire project, including all screen images and fonts.
Power Cycle Gracefully: Never disconnect power while Cscape is writing to the 990’s flash memory. Always click "Stop" in Cscape before powering down.

HMI Development: Simplifies the creation of operator interface screens. Screens can be triggered by logic or run independently, using the same I/O references to avoid duplicate work. Cscape 9

Here are some detailed specifications of the CScape 990: