Dap-1360 Firmware 6.10 ((top)) Download Page

D-Link DAP-1360 Firmware 6.10 is specifically associated with Hardware Revision F1

Download: Obtain the correct .bin or .img firmware file for your specific hardware revision (printed on the device's sticker). Dap-1360 Firmware 6.10 Download

4. Installation Procedure (Summary)

  1. Verify hardware revision – Label on device underside.
  2. Reset device to factory defaults via web UI (192.168.0.50) or physical reset button.
  3. Connect PC via Ethernet to LAN port of DAP-1360.
  4. Access web UI → Maintenance → Firmware Upgrade.
  5. Select the downloaded DAP1360_RevX_fw_v6.10.bin file.
  6. Wait 3–5 minutes – do not power off or interrupt.
  7. After reboot, perform another factory reset.

Wrong Hardware Version: If the interface says "Invalid Image," double-check your H/W revision on the bottom sticker. D-Link DAP-1360 Firmware 6

Update Process: Access your device's web interface (usually 192.168.0.1), log in, and navigate to Maintenance > Firmware Upgrade. Verify hardware revision – Label on device underside

Scaricare il firmware 6.10

  • Vai alla pagina di supporto ufficiale D-Link per il modello DAP-1360 e scarica il file firmware corrispondente alla versione 6.10.

    Below is a detailed guide covering the specifications, risks, and download procedures for this firmware. ⚠️ Critical Security Advisory

    • Imposta IP statico sul PC come richiesto dalla guida D-Link (es. 192.168.0.2).
    • Avvia il server TFTP (nome e percorso del file come documentato).
    • Segui la procedura di upload TFTP (talvolta richiede alimentare/tenere premuto un tasto di reset durante l’avvio).