DP Dual Trac 20 Assembly Guide: Step-by-Step Setup & Maintenance
Upper Frame & Pulley Housing: Bolt the top horizontal frame member to the main vertical upright. Dp Dual Trac 20 Assembly Manual
| Symptom | Probable Cause | Solution |
| :--- | :--- | :--- |
| Low Suction | 1. Air leak at drum seal.
2. Clogged filters.
3. Incorrect motor rotation. | 1. Re-seat and clamp drum.
2. Run cleaning cycle; replace filters if needed.
3. Swap two power leads. |
| High Motor Amps | 1. Ductwork blocked.
2. Impeller rubbing housing.
3. Voltage imbalance. | 1. Clear blockage.
2. Adjust impeller clearance.
3. Check facility power supply. |
| Dust Exiting Exhaust | 1. Broken filter cartridge.
2. Filter seal leaking. | 1. Replace filter immediately.
2. Re-install cartridge ensuring tight seal. | DP Dual Trac 20 Assembly Guide: Step-by-Step Setup
The Dual Trac 20’s base contains a dual‑locking mechanism: Air leak at drum seal