E8372h-153 Dead Boot Repair May 2026

The E8372h-153 Dead Boot Repair: A Comprehensive Guide

Part 3: Method 1 – UART Serial Recovery (Most Reliable)

The E8372h-153 has engineering test points hidden under the metal shield. Accessing UART gives you raw boot log output and interrupt ability. E8372h-153 Dead Boot Repair

If your unit remains dead after these steps, salvage the HiSilicon Balong chipset for other embedded projects, or replace the entire PCB – the E8372h-153 is still widely available on secondary markets for under $15. The E8372h-153 Dead Boot Repair: A Comprehensive Guide

How to reset the Huawei E8372 Turbo Stick to the factory default settings The device draws current (often around 50-80mA) but

  • The device draws current (often around 50-80mA) but shows no enumeration on USB.
  • It does not appear as a serial port, a modem, or a storage device.
  • Conventional tools like fastboot or adb will not recognize it.
  • Disconnect the dongle.
  • Short the test points on the PCB (located near the chipset) using tweezers or a wire.
    Reference: TP1 (GND) and TP2 (BOOT) – consult board layout for E8372h-153.
  • Keep the points shorted while connecting the dongle to the PC.
  • Release after 5 seconds. The device should now appear as "Huawei Balong" or "COM port" in Device Manager.
×
​