Huawei Atn 910d-a Datasheet [new] Now

Introduction

Enter the Huawei ATN 910D-A. Part of the industry-respected ATN (Access Transport Node) series, this device is often the unsung hero of last-mile access, FTTx backhaul, and industrial IoT connectivity. Huawei Atn 910d-a Datasheet

Disclaimer: Specifications are based on Huawei’s publicly available datasheets. Always verify current availability and software version support with your Huawei partner before procurement. Introduction Enter the Huawei ATN 910D-A

Key Features

Space-Constrained Locations: Its 220mm depth allows it to be co-installed with wireless base station equipment (like UBUs) in standard outdoor cabinets. Verify ordered model and interface card mix

The Huawei ATN 910D-A is a compact, high-performance 1U fixed-port router designed for the 5G era, specifically targeting base station access and VIP private line services. As part of the ATN series, it provides high-density access with a switching capacity of 800 Gbps to 880 Gbps. Key Technical Specifications Specification Switching Capacity 800 Gbps to 880 Gbps Interface Density 4 x 100GE/50GE, 16 x 25GE/10GE/GE, 8 x 10GE/GE/FE Form Factor 1U (442mm x 220mm x 44.45mm) Weight ~4 kg (base) to 4.3 kg (with AC power) Typical Power Operating Temp -40°C to +65°C (supports outdoor deployment) Core Capabilities

Example checklist for a single‑site deployment

1. Verify ordered model and interface card mix.
2. Confirm optics and fiber type; test end‑to‑end fiber links.
3. Install in 1U slot; secure rails and ground.
4. Connect redundant power (AC or DC) and verify indicators.
5. Connect management port to OOB network; change default credentials.
6. Load tested firmware version; enable SSH, disable insecure services.
7. Configure interfaces, VLANs, routing (OSPF/BGP) and clock sync settings.
8. Enable protection (BFD + FRR) for critical links; run failover tests.
9. Integrate with NMS/iMaster and schedule monitoring/alarms.
10. Document configuration backup and recovery procedure.