Work | Mount With Dt 406

The DT series includes specialized receptacles designed for inline cable-to-cable applications or panel mounting. 1. Connector Components

• Shape: A truncated cone or hourglass profile, designed to allow deflection in both compression and shear.
• Material: Natural rubber (NR) or chloroprene (CR) bonded to two galvanized steel plates or threaded studs.
• Load capacity: Typically rated for static loads between 100 kg to 250 kg per mount (depending on deflection requirements).
• Deflection: 4–6 mm under nominal load, providing 80–90% vibration isolation efficiency above 25 Hz.

• Annual Disassembly: Once a year, remove the mount. Clean the dovetail and rail with a brass brush and solvent. Reapply a tiny amount of anti-seize grease to the DT clamp threads.
• Check Fasteners: Titanium and steel fasteners can gall. Inspect the clamping screws for rust or stripping every six months.
• Replace Springs: Some DT 406 quick-detach models have internal springs. These wear out after 5,000+ cycles. Replace them immediately if the lever feels loose.

Critical: Do not use a solid spacer to raise the equipment. The DT 406 requires free vertical space to compress. mount with dt 406

Manual Documentation: Certain technical manuals (like those for Canon Network Cameras) use internal document IDs such as 406060 for mounting and installation guides. The DT series includes specialized receptacles designed for

The DT 406 mount is more than just a piece of metal; it’s the foundation of your precision system. By choosing a mount that offers stability, flexibility, and durability, you reduce downtime and increase the accuracy of your data. Whether you’re retrofitting an old line or designing a new one, the DT 406 is a reliable choice that stands up to the rigors of the modern floor. Shape: A truncated cone or hourglass profile, designed

Key Features of a Premium Mount with DT 406

If you are shopping for a mount with DT 406, you should not settle for cheap aluminum. Look for these engineering hallmarks: