Numark Mixtrack Pro 2 Rekordbox Mapping -

• Select a function (e.g., Deck 1 > Play).
• Click Learn and press the hardware button.
• Set Interaction Mode (Toggle, Trigger, or Direct).

Before starting a manual mapping, be aware of these standard Rekordbox restrictions for non-Pioneer controllers: Jog Wheels: numark mixtrack pro 2 rekordbox mapping

• Shift + Pad 1: Beat Jump (-)
• Shift + Pad 2: Beat Jump (+)
• Shift + Pad 5: Slip Mode (On/Off)

Troubleshooting

• Controller not recognized: Reconnect USB, try a different cable/port, install Numark drivers on Windows, restart Rekordbox.
• Jog wheel not scratching: Ensure Rekordbox vinyl mode is enabled AND the jog sends touch data; test with MIDI monitor to confirm messages.
• Some functions double-trigger: Check for duplicated MIDI mappings in Rekordbox and remove conflicts.
• Latency / audio glitching: Use a low-latency audio interface or adjust Rekordbox audio buffer size.

Some popular mapping techniques for the Numark Mixtrack Pro 2 in Rekordbox include: While the Numark Mixtrack Pro 2 Go to

: Rekordbox does not easily allow mapping of non-Pioneer jog wheels for scratching or pitch bending. Users often find the wheels unresponsive or require complex workarounds. Inverted Controls : Some users report that the crossfader tempo faders Select a function (e

Verification Test

Load a track on Deck 1. Press the Play button. Does the track start? Turn the Low EQ. Does the bass frequency drop? If yes, you are live.

Common Limitations (No matter what mapping you use)

• No RGB pad feedback – Pads will likely not light up fully.
• No beat countdown / slicer on pads unless manually mapped.
• Jog wheel tension cannot be adjusted via software.
• Shift functions may be limited vs. a native CDJ layout.