Onkyo Rc-799m Remote Manual May 2026

1. Press and hold Receiver and Enter simultaneously (LED blinks twice).
2. Press 1 three times (1-1-1).
3. The LED will blink four times. The remote is now factory fresh.

Customization Tips

• Assign commonly used inputs to quick access via receiver’s input assign menu for faster selection.
• For multi‑room setups, configure Zone 2 to mirror main source or play independent source via the Zone controls.
• Save preferred DSP modes and speaker levels under memory settings if your receiver supports presets.

⚠️ Not all functions may work with non-Onkyo devices. The RC-799M sends IR commands only—it will not control Bluetooth or RF devices like a Fire TV Stick without an IR adapter. onkyo rc-799m remote manual

1. Turn on the target device.
2. Press and hold the Device Mode button (e.g., CBL/SAT) and Enter until the LED blinks twice.
3. Press the Play button repeatedly (about once per second). The remote will cycle through all codes in its library.
4. Watch the device. The moment it turns off, immediately press Enter. The LED blinks twice to save the code.

• Compatible with several Onkyo AV receivers and home theater systems
• Infrared (IR) remote control with a range of approximately 23 feet (7 meters)
• Backlit LCD display for easy operation in the dark
• Supports various functions, including input selection, volume control, and playback controls

In this post, I’ll cover everything the official manual includes: button functions, programming codes for your TV/Blu-ray player, battery replacement, and common troubleshooting tips. The Onkyo RC-799M Go to product viewer dialog

Introduction