Quitar Cuenta Google Zte Blade L9 Android 11 Con Pc |work| May 2026

Para quitar la cuenta de Google (FRP) de un ZTE Blade L9 con Android 11 usando una PC, el método más efectivo y profesional consiste en utilizar herramientas diseñadas para procesadores Spreadtrum (SPD), que es el chip que utiliza este modelo.

Step 4: Connect ZTE Blade L9 to the PC and Run ADB Commands

1. On your PC, extract the Android SDK Platform Tools to a folder (e.g., C:\ADB).
2. Open Command Prompt as administrator and navigate to that folder:

   cd C:\ADB
   

3. Connect your ZTE Blade L9 to the PC via USB cable.
4. Verify connection:

   adb devices
   

   You should see a device ID followed by “device”. If it says “unauthorized”, check your phone screen and allow USB debugging permission.
5. Now, remove the Google account using the following commands:

   adb shell
   pm list users
   

   Note the user ID (usually 0 or 10).

   pm remove-user 0
   

   (Replace 0 with your user ID if different)

Step 6: Verification

1. After the reboot, set up your ZTE Blade L9 as a new device.
2. When asked for a Google account, try adding a new one or skip.
3. If no previous account appears, the removal was successful.

Steps:

1. Remove the back cover of the ZTE Blade L9 (it is removable on this model).
2. Locate the two small metal dots labelled "TP" (Test Point) near the SIM card slot.
3. Short these two points with a pair of tweezers while connecting the USB cable to the PC.
4. The PC will detect the phone as SPD Flash Device.
5. Use Research Download Tool or SPD Upgrade Tool on PC to flash only the FRP partition (not the full firmware).
6. This clears the Google account forcefully.

Tools needed (choose one based on your ZTE model)

• Software: