Baccalaureate & Commencement

Grove City College's Baccalaureate ceremony will be held at 7 p.m. Friday, May 8 and Commencement will be held Saturday, May 9 at 10 a.m.
Baccalaureate will be held inside the PLC Arena.
Both events will be livestreamed at www.gcc.edu/livegrad.

Search

Satlink - Ws6906 Software Upgrade

Satlink WS6906 Software Upgrade Report

  1. Click "Start" or "Upgrade" in the PC software first. The software will usually say "Waiting for device..." or the progress bar will turn yellow.
  2. Power OFF the WS6906 meter.
  3. Connect the USB cable to the meter.
  4. Power ON the WS6906 meter.
  5. Watch the PC screen: The progress bar should turn blue or green and start filling up.
    • Format the card using a PC (not Quick Format – do a full format).
    • Card capacity sweet spot: 8GB to 16GB.

    Step 5: CompletionWait for the "Upgrade Success" message. Do not disconnect the cable or turn off the device during this process, as it can "brick" the unit. A Quick Word of Caution satlink ws6906 software upgrade

    Step 5: Completion & Reboot

    • Once verification reaches 100%, the screen will say "Update Complete. Reboot in 5 seconds."
    • The device will restart automatically. Remove the SD card immediately after the Satlink logo appears to prevent a re-flash loop.

    Check your current firmware version: Menu → System → System Info. Write down the version number and hardware revision (e.g., H/W: V2.0). Ensure the new firmware is compatible with your hardware revision. Satlink WS6906 Software Upgrade Report