If you manage a Ricoh multifunction printer (MFP) in a high-volume office environment, encountering a service call error can bring productivity to a screeching halt. One of the most common yet misunderstood error codes on Ricoh devices (including the MP, IM, and Pro series) is SC569-00.
: Turn the machine off using the main power switch, wait for about 60 seconds, and turn it back on. Check Paper Compatibility : Ensure you are using standard office paper sc569-00 ricoh
Replace PM Parts on Schedule: Do not skip fuser overhaul at the recommended PM counter (usually 300k–600k prints depending on model). Replace the thermistor, lamp, and pressure roller as a set. SC569-00 Ricoh: The Ultimate Troubleshooting Guide for the
Power Cycle: Turn the machine off and then back on to see if the system clears the error automatically. Check Paper Compatibility : Ensure you are using
Pull the fuser unit out (be careful, it may be hot) and inspect the rear connectors. Ensure no pins are bent and that the unit "clicks" firmly into place when re-inserted. 4. Reset the SC Code (Service Mode)
Even a tiny scrap of paper in the fuser area can block the motor. Clean the Sensors: Dust on the pressure release sensor is a common culprit. Hard Reset: Power down, unplug for a minute, and restart. If the code persists, you may need to clear it through SP Mode 5-810 The fuser is
To break that down: