Solar Camera Yn88-wifi Manual |verified|

is a low-power, solar-powered security camera typically used with the UBox or uBell apps. To set it up, you must use a 2.4 GHz Wi-Fi network, as 5 GHz networks are not supported. 1. Initial Preparation

If fully charged (100%), the battery lasts roughly 72 hours (3 days) in standby/motion mode. In constant recording mode: 6-8 hours.

Storage Full:If using a MicroSD card (up to 128GB supported), ensure it is Class 10 or higher. The camera will automatically overwrite the oldest footage when the card is full. solar camera yn88-wifi manual

8. Typical App Configuration (e.g., Yoosee, CloudEdge, or V380)

Most YN88-WiFi cameras use Yoosee (Pro) or CloudEdge app. is a low-power, solar-powered security camera typically used

3. App Installation & Connection

Most of these cameras use the ICSee app. If fully charged (100%), the battery lasts roughly

The YN88-WIFI is built to withstand outdoor environments while providing 1080p surveillance. Resolution: 1080p HD (1920x1080) at 15fps. Solar Power: Detachable 5.5W panel for continuous charging. Battery: 10400mAh (typically 4x 18650 lithium batteries).

Camera Features

YN88-WIFI Solar Camera
Solar Panel
Mounting Bracket
Power Cable
User Manual
Quick Start Guide

: Register a new account using your email and verify it through the link sent to your inbox. Pairing Mode Turn the power switch to the button until the blue indicator light begins to blink. Connect to Wi-Fi Ensure your smartphone is connected to a 2.4GHz Wi-Fi network (5GHz is not supported).