The X8 wire cut control system is a highly recommended "middle speed" or fast wire EDM controller designed for standalone operation without the need for an external computer. It is widely used in models like the DK77 series for precision metal machining. Core System Features
Never open the electrical cabinet while the machine is powered on. x8 wire cut system manual 10kv pdf
Solution: Ensure the room temperature is stable. Double-check the programmed wire radius compensation value against the actual spark gap. The X8 wire cut control system is a
Monthly:
Import File: Load the DXF or G-code file into the controller via USB or network. Solution: Ensure the room temperature is stable
| Material | Thickness (mm) | Voc (kV) | Ip (A) | Ton (µs) | Wire speed (m/s) | Result | |----------|----------------|----------|--------|----------|------------------|--------| | Steel SKD11 | 50 | 8 | 12 | 6 | 10 | 280 mm²/min | | Aluminum 6061 | 80 | 6 | 8 | 4 | 8 | 400 mm²/min | | Tungsten carbide | 30 | 10 | 5 | 2 | 12 | 90 mm²/min |